Damp

A-Z of DIY & Building Guides How To Spot And Deal With Damp

Email this page

Contents:

Date Published:
27/05/2008

How to Spot and Deal with Damp

Damp can affect any home and, with the obvious health and comfort issues, it is always wise to spot any problems early and remedy them quickly. Here's what to look for.

By Sacha Markin

Damp

What are the Causes of Damp?

One of the most frequent problems encountered in the home is damp. Each year, the average home in the UK copes with around 25,000 gallons of rain water, so it is no surprise that damp can become a big problem for many. Although most damp problems are much less serious than they actually look, whatever the cause, damp can be very bad for our health. From aggravating respiratory problems to encouraging the emergence of mites and mould, the effects of damp can be serious, not to mention making the whole property cold and unappealing.

In many cases, damp can be unwittingly encouraged due to poor maintenance. There are several causes of damp in the home, but all can be remedied. Damp can be in or around the roof, walls, floors, windows, doors or pipe-work on any property. Often, if there is a damp patch visible inside the home, the cause can be identified from an issue on the exterior. For instance, a wet patch at the top of a wall might be due to a leaking gutter outside. So let's look at the main damp causes:

Rising Damp

Rising damp is caused by water soaking up through porous materials into the floors and walls of the property, and usually occurs in houses which haven't got a damp proof course, or the course has failed to work properly. It can be spotted in a number of ways - namely, if the walls feel damp and cold to the touch, or if there is distinguishing mark on the inside walls. Internal decorations can become stained and damaged, and plaster can become loose. Any wall in contact with the ground can suffer from rising damp, thus affecting walls both inside and out - however it rarely comes up further than one metre in height.

Penetrating Damp

Penetrating damp is caused by issues with the building or plumbing, where a problem has allowed water to enter the property. Symptoms will usually only occur during wet weather, but it can affect roofs and ceilings, along with walls. A watermark might appear, and grow if the water continues to enter. If not fixed, plaster may start to perish. Penetrating damp can sometimes be caused by gutter or roof problems which have allowed rainwater to spill onto and saturate areas of wall. Penetrating damp is most frequent in older homes, which have solid walls. A new build property with cavity walls offers more protection and is unlikely to suffer from this type of defect. Penetrating damp can be tricky to pin-point, and often may require expert help.

Condensation

Condensation differs from rising and penetrating damp in that it's caused by excessive moisture that cannot escape from the property (as opposed to water coming in). If there isn't sufficient ventilation, condensation will arise and moisture will be in the air, even if you cannot see it. Using radiators to constantly dry clothes, not opening windows, poor heating, and even portable gas heaters can all contribute. Mould may appear on walls, ceilings, furniture and even curtains. There is usually a strong musty smell present and, unlike the other types of damp, condensation is largely caused by the inhabitants of the property, rather than problems with the actual building.


Advertisement

More on 4Homes

4Homes Property Search

Over 300,000 properties to search, interactive maps, neighbourhood reports and more...

 

e.g. Notting Hill, SW3, Glasgow

Powered by: Nestoria

Advertisement


4Homes