If you've got an outside area which has been plastered then check out our guide on the best way to paint the area.
We'd strongly advise that you don't use plaster externally. A sand and cement mixture will do the job. To get a smoother finish, use a finer grain of sand and gently smooth over with a float.
Paint with masonry paint which you should be able to get from a large DIY store, this is usually water based. If painting over bare sand and cement, the first coat should be a primer coat of paint mixed with water. Always read the label - the paint manufacturer's advice should guide you as to the proportion of water to paint to mix up.
Your Comments
Post your comment
Please note: In order to post a comment you need to be registered and logged in to Channel 4:
Sign In Here or Register Here
Comments closed
Comments are closed at the present time
Comments
Thank you for your comment!
Your message will be reviewed and the best ones will be published below.
If you intended to make an official comment to Channel 4 please contact us.