George Clarke
Property & Design Expert
George Clarke's expert advice on how to set fence posts in concrete.
Time required:
Depends on size of garden but allow at least a day for fitting the posts
Cost:
From about £25 for a 6 x 6ft panel plus £10 for 5kg of cement
Skill level:
Low
You'll need:
Concrete; spirit level; drill/driver; gloves; string and pegs; sledge hammer (for metal spikes); spade; spirit level; tape measure; saw; hammer; spanner
For advice on finishing your fence, see How To Erect A Fence.
Expert DIY Advice From George Clarke
How To Lay Laminate Flooring
How To Bleed A Radiator
How To Fit A Bathroom Sink
How To Fit Wall Tiles
How To Tile A Floor
How To Grout Tiles
How To Seal Around A Basin
How To Set Fence Posts In Concrete
How To Erect A Fence
How To Prepare & Paint Interior Woodwork
How To Level A Floor
How To Screed A Floor
How To Unblock A Toilet
How To Build A Brick Wall
How To Sand A Floor
How To Strip Paint
How To Remove Old Floor Tiles
How To Remove Old Floorboards
How To Fix Squeaky Floorboards
How To Fit Underfloor Heating
How To Fit A Radiator
How To Hang A Door
How To Wire A Plug Socket
Find out more about estate agents and how they can help you
Your Comments
Post your comment
Please note: In order to post a comment you need to be registered and logged in to Channel 4:
Sign In Here or Register Here
Comments closed
Comments are closed at the present time
Comments
Thank you for your comment!
Your message will be reviewed and the best ones will be published below.
If you intended to make an official comment to Channel 4 please contact us.
Comments