5. Tips And Advice
5. Tips And Advice (Image 5 of 5)
- If you’re sealing around a resin bath, fill it with water first. This will make the sides of the bath deflect away from the wall. Now run the mastic around the edge and leave to dry. When you empty the bath, the sides will push back towards the wall, forming a watertight joint.
- Practice running a smooth continuous bead of sealant on the inside edge of a cardboard box.
- Most sealants will last for a few days once the pack is opened. Push a matchstick in the end to stop the end becoming blocked with dry sealant.
- Sealants dry quickly; wash your hands and the tools as soon as you’ve finished the job, following the manufacturer’s instructions.
- If you’re nervous about making a mess, make a border of masking tape on the basin and worktop edges. Run a bead of sealant between the tape lines and remove the tape before smoothing the edges.
Expert DIY Advice From George Clarke
How To Lay Laminate Flooring
How To Bleed A Radiator
How To Fit A Bathroom Sink
How To Fit Wall Tiles
How To Tile A Floor
How To Grout Tiles
How To Set Fence Posts In Concrete
How To Erect A Fence
How To Prepare & Paint Interior Woodwork
How To Level A Floor
How To Screed A Floor
How To Unblock A Toilet
How To Build A Brick Wall
How To Sand A Floor
How To Strip Paint
How To Remove Old Floor Tiles
How To Remove Old Floorboards
How To Fix Squeaky Floorboards
How To Fit Underfloor Heating
How To Fit A Radiator
How To Hang A Door
How To Wire A Plug Socket
Use our service to find a reputable local builder, based on the ratings of their real-life clients
Bag yourself a stylish portable heater from Calor, and stay toasty this winter

Your Comments
Post your comment
Please note: In order to post a comment you need to be registered and logged in to Channel 4:
Sign In Here or Register Here
Comments closed
Comments are closed at the present time
Comments
Thank you for your comment!
Your message will be reviewed and the best ones will be published below.
If you intended to make an official comment to Channel 4 please contact us.