2. Step Two
2. Step Two (Image 2 of 5)
Cut the tip of the sealant nozzle at 45 degrees, around 15-20mm from the end. Unscrew the nozzle and trim off the tube seal. Screw on the nozzle and fit the tube into a mastic gun. Test the sealant flows out in a smooth bead.
Expert DIY Advice From George Clarke
How To Lay Laminate Flooring
How To Bleed A Radiator
How To Fit A Bathroom Sink
How To Fit Wall Tiles
How To Tile A Floor
How To Grout Tiles
How To Set Fence Posts In Concrete
How To Erect A Fence
How To Prepare & Paint Interior Woodwork
Use our service to find a reputable local builder, based on the ratings of their real-life clients
Our presenter could be popping round to your house for a consultation and a cuppa
Tips on refreshing your home for Christmas, plus expert advice on common DIY jobs
Your Comments
Post your comment
Please note: In order to post a comment you need to be registered and logged in to Channel 4:
Sign In Here or Register Here
Comments closed
Comments are closed at the present time
Comments
Thank you for your comment!
Your message will be reviewed and the best ones will be published below.
If you intended to make an official comment to Channel 4 please contact us.