George Clarke
Property & Design Expert
Nothing’s more annoying than the persistent squeak of a badly fitting floorboard – find out from George Clarke how to cure the problem.
Time required:
30minutes
Cost:
Less than £5
Skill level:
Novice
You'll need:
Drill, screwdriver and drill bit; 60mm screws; talc; wide-bladed cold chisel; club hammer
Click here to get started with George Clarke's step-by-step guide on how fix squeaky floorboards
Expert DIY Advice From George Clarke
How To Level A Floor
How To Screed A Floor
How To Unblock A Toilet
How To Build A Brick Wall
How To Sand A Floor
How To Strip Paint
How To Remove Old Floor Tiles
How To Remove Old Floorboards
How To Fix Squeaky Floorboards
How To Fit Underfloor Heating
How To Fit A Radiator
How To Hang A Door
How To Wire A Plug Socket
How To Lay Laminate Flooring
How To Bleed A Radiator
How To Fit A Bathroom Sink
How To Fit Wall Tiles
How To Grout Tiles
How To Seal Around A Basin
How To Set Fence Posts In Concrete
How To Erect A Fence
How To Prepare & Paint Interior Woodwork
How To Tile A Floor
Use our service to find a reputable local builder, based on the ratings of their real-life clients
Our presenter could be popping round to your house for a consultation and a cuppa
Get advice on all of those DIY jobs from the experts at B&Q
Your Comments
Post your comment
Please note: In order to post a comment you need to be registered and logged in to Channel 4:
Sign In Here or Register Here
Comments closed
Comments are closed at the present time
Comments
Thank you for your comment!
Your message will be reviewed and the best ones will be published below.
If you intended to make an official comment to Channel 4 please contact us.