How To Erect A Fence | 4Homes

3. Step Three

3. Step Three (Image 3 of 5)

Post your comment

By posting on this website you are agreeing to abide by our Comments Policy.
Mandatory Fields are marked with *

Display Name: *

Email address: *
(Not displayed)

Your Comment (Maximum characters: 4000) *

You have

characters left

Your website address:
(Optional)

Anonymous:

Back to Previous Page

Wow, this is the vaguest article ever on this topic.

Posted by cornea503 on 13/07/2009 16:01:34

Offensive? Unsuitable? Report this comment
hi your (how to) parts need to have a download section so we can download the whole item as a one and not copy one page at a time, or have i just missed that part? can you help

Posted by gareth on 09/05/2009 19:36:32

Offensive? Unsuitable? Report this comment
Nice advice, but from my own experience there is a bit more to it. Unlesss the fence is straight in all respects it won't look good. A line is required to keep the length of the fence straight. The posts are easier to get right if the correct spirit level is used which measures two faces of the post at the same time. The panels need to be either all at the same level or to change level in equal steps. Also the top of each panel needs to be checked by spirit level to make sure it is in line. End caps keep the rain out of the 'open' grain end of the posts, and only cost about 60p each for basic ones. It is safer for inexperienced installers to fix the fence post/panel/post/panel rather than setting all the posts first and then finding the panels do not fit. Posts set in concrete will probably last considerably longer.

Posted by Fe on 13/03/2009 16:33:04

Offensive? Unsuitable? Report this comment