2. Step One
2. Step One (Image 2 of 7)
It’s just like building a shed: first of all, position the floor and erect the gable ends and sides. Use a builder’s square to check the corners are all at right angles, and then fit the roof ridge bar. Nail in the roof support block and corner trims, using 40mm nails. Then lift the roof panels into position.
Check out the shopping list for building a playhouse
Browse all 4Homes step-by-step DIY advice
Go back to the B&Q DIY Tips & Tricks homepage
Top tips on giving your home a new lease of life in time for Christmas
Get expert advice from B&Q on how to bring wildlife into your garden
Make laying timber decking the simplest of tasks, with expert advice from B&Q
Your Comments
Post your comment
Please note: In order to post a comment you need to be registered and logged in to Channel 4:
Sign In Here or Register Here
Comments closed
Comments are closed at the present time
Comments
Thank you for your comment!
Your message will be reviewed and the best ones will be published below.
If you intended to make an official comment to Channel 4 please contact us.
Comments