1. Step One: Stick the fabric to the backing material
1. Step One: Stick the fabric to the backing material (Image 1 of 7)
Choose your fabric depending on what sort of light you want your finished lamp to give off. Material with red and yellow tones will give a warm glow. Greens and blues will give off a cold light. I chose a purple fabric that has some gold in it to give it that all important warmth - and also goes with my lamp stand.
The backing that we're using can be bought online. Search for 'lampshade material' and look for semi-transparent, rigid, self-adhesive backing material, which you can buy in various thicknesses.
Make sure you iron the fabric, if it's creased. Then you can begin to smooth the backing material gently over the fabric. Start by pulling a few centimetres of the self-adhesive backing off your backing material and place it on the fabric. Slowly, continue to pull off the backing, pressing with your other hand and making sure you keep it smooth. If you're doing this for the first time, it's easier to get someone to help you with this step!
More From 4Homes
Design & Craft How To Guides
Find Craft Courses
Kirstie's Homemade Home
Meadow Gate photo gallery
Your chance to contribute to Kirstie's Homemade Home, by suggesting a craft to appear in the show

Your Comments
Post your comment
Please note: In order to post a comment you need to be registered and logged in to Channel 4:
Sign In Here or Register Here
Comments closed
Comments are closed at the present time
Comments
Thank you for your comment!
Your message will be reviewed and the best ones will be published below.
If you intended to make an official comment to Channel 4 please contact us.
Comments