Naomi Cleaver
Fitting a roller blind is a project anyone can tackle, even if the blind has to be cut to fit. If you can use a screwdriver and can drill a hole, you're ready. Just follow this step by step guide.
Time required:
Two hours
Cost:
Ready-made roller blinds, from around £10.
Skill needed:
Just get handy with your screwdriver.
You'll need:
Ready-made roller blind (screws and wallplugs are usually supplied), stepladder, metal measuring tape, pencil, drill, spirit level, screwdriver. If cutting the blind to fit, you’ll need a small hacksaw and sharp scissors
Before you start, see How To Measure For Blinds.
Click here to get started with Naomi Cleaver's step-by-step guide on how to fit a roller blind
Expert Interior Design Advice From Naomi Cleaver
How To Wallpaper
How to Make Lined Curtains Fast
How To Paint Furniture
How To Paint Stripes
How To Stencil
How To Clean Paint Brushes
How To Fit A Roller Blind
How To Make Unlined Curtains
How To Measure For Blinds
How To Measure For Curtains
Expert DIY Advice From George Clarke
How To Lay Laminate Flooring
How To Bleed A Radiator
How To Fit A Bathroom Sink
How To Fit Wall Tiles
How To Tile A Floor
How To Grout Tiles
How To Seal Around A Basin
How To Set Fence Posts In Concrete
How To Erect A Fence
How To Prepare & Paint Interior Woodwork
Exclusive competitions and discount offers for 4Homes readers in our Advent Calendar 2009
Need some inspiration for a dining area - however small? Check out our gallery of rooms for ideas.jpg){kind=small}
You could win a copy of Design Museum's 50 Chairs That Changed The World
Your Comments
Post your comment
Please note: In order to post a comment you need to be registered and logged in to Channel 4:
Sign In Here or Register Here
Comments closed
Comments are closed at the present time
Comments
Thank you for your comment!
Your message will be reviewed and the best ones will be published below.
If you intended to make an official comment to Channel 4 please contact us.